View PST60_4300032.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PS SERIES TRIPLE
PS SERIES - TRIPLE OUTPUT SUPPLIES
Switching Power Supply
40 and 60 WATTS
FEATURES
* Low Cost, High Reliability * 105C Output Capacitor * International AC Input Range * Built In EMI Filter, Low Ripple Noise * High Efficiency, Low Working Temperature * Soft-Start Circuit, Limiting AC Surge Current * Short Circuit, Overload, Over Voltage Protected * Compact Size, Light Weight * 100% Full Load Burn-In Test * CSA950, UL1950, IEC950 and EN60950 Approved * CISPR22 (EN55022), IEC801-2, 3, 4, IEC555-2 Verification
THE PS SERIES FROM WALL INDUSTRIES
The PS Series of cased switching power supplies offers universal input, small size and a high reliability mature product.
SPECIFICATIONS: PS SERIES
All specifications apply @ +25C ambient unless otherwise noted.
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Efficiency........................................................See Table Isolation Voltage (input to output) 1 min....................3KV ...........................(input to ground) 1 min..............1.5KV ...........................(output to ground) 1 min............0.5KV Hold-Up Time..............................10mS-16mS/115VAC ...................................................60mS-80mS/230VAC
Input Voltage.......................................85-264VAC Full Range Input Frequency.........................................................47-63Hz
OUTPUT SPECIFICATIONS
Output Current.........................................................See Table Output Voltage Tolerance.............2% Primary, 6-8% Auxiliary Line Regulation(LL-HL).......................................0.5% Primary ................................................................0.5%-1% Auxiliary ENVIRONMENTAL SPECIFICATIONS Load Regulation..................0.5% Primary, 1%-6% Auxiliary Operating Temperature.............................-10C-+60C Overload Protection.........105%-150%/115VAC.........Foldback Storage Temperature................................-20C-+85C Over Voltage Protection.............................5-75-6.75V Primary Humidity (working temp.)...........................20%-90%RH Ripple & Noise..........................................100mV p-p Primary ..............(storage temp.)..........................10%-95%RH ..................................................100mV - 120mV p-p Auxiliary Temperature Coefficient................0.03%/C (0-50C) Primary PHYSICAL SPECIFICATIONS Dimensions................................................See Drawing Construction...........................................Enclosed case Due to advances in technology, specifications subject to change without notice.
8/5/01
1
603 778 2300
WWW.WALLINDUSTRIES.COM
40 and 60 WATTS
Input Voltage (VAC) Output Voltage (VDC) Output Current (Amps) Max. Output Current (A) Max. Output Power Efficiency (%)
PS SERIES TRIPLE
Model Number
85-264
5/+12 +5 /12 +5/15 5/+12 +5/12 +5/15
3.0/0.5/2.0 3.0/2.0/0.5 3.0/1.5/0.5 5.0/0.5/2.5 5.0/2.5/0.5 5.0/2.0/0.5
.6-5/.1-1/.2-3 45 Watts .6-5/.2-3/.1-1 45 Watts .6-5/.2-2/.1-1 45 Watts .5-7/0-1/.2-3.557.5 Watts .5-7/.2-3.5/0-161 Watts .5-7/.2-3/0-162.5 Watts
72 72 72 72 72 72
PST-40A PST-40B PST-40C PST-60A PST-60B PST-60C
NOTE:
1. All parameters are specified at 230VAC input, rated load, 25C ambient. 2. Tolerance: Include set up tolerance, line regulation, load regulation. 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf & 47uf capacitor. 4. Load regulation is measured from 20% to 100% rated load and other output at 60% rated load. 5. Each output provide up to maximum current, but total load can not exceed max. output power. 6. All case and pin-to-case measurements for reference only unless noted otherwise.
8/5/01
WWW.WALLINDUSTRIES.COM
603 778 2300
2
PS SERIES TRIPLE
40 and 60 WATTS
8/5/01
3
603 778 2300
WWW.WALLINDUSTRIES.COM

▲Up To Search▲

Price & Availability of PST60

	To Download PST60 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .